DRILL 1 – MIRROR GUIDES
Adjust the width of the magnetic putter guides to fit your putter to work on consistent delivery. Guides can be offset from the centre to work on off the toe strikes. Mirror markings encourage a square face at set-up and correct path.
DRILL 2 – PUTTING GATE
Place the small (50mm) gate 1 foot from the ball. The putter face must be square, within 1/2 a degree open or closed at impact, for the ball to roll through the gate.
DRILL 3 – ANGLED MIRROR
Use putting gate to support the mirror at an angle to get a different view of you position and putting stroke. By placing the angled mirror behind the target you can also check your head position.
- Mirror: L 24cm W 20cm H 0.5cm